Steam
Steam Turbine
The Steam Turbine is a multiblock that burns Steam to make large amounts of rotational force. A full-size one outputs more than a max-size Create steam engine.
Steam can come from a Firebox Boiler, a Solar Power Tower in Steam mode, a Fusion Reactor, or the leftover Steam from a Crystallizer.

Parts#
| Part | How to get it |
|---|---|
| Turbine Casing | Use a Zinc Ingot on a Block of Industrial Iron (by hand or with a Deployer) |
| Turbine Casing Glass | Use Glass on a Turbine Casing. Works exactly like Casing, but you can see inside |
| Turbine Rotor | Crafting: Shaft on top, Turbine Casing, Andesite Alloy, Turbine Casing in the middle, Shaft on the bottom |
| Andesite Turbine Blade | Mechanical Crafting: 6 Andesite Casing (4 in the top row, 2 under the first two) makes 2 blades |
| Brass Turbine Blade | Same shape, with Brass Casing |



Building It#
The turbine is a 7×7 tube of Casing built in layers, with a column of Turbine Rotors down the middle. From the bottom up:
- Floor: a full 7×7 layer of Casing.
- Blade layers (1 to 20): a 7×7 ring of Casing with a Turbine Rotor in the center. Put a Turbine Blade on each of the rotor's four sides (north, south, east and west).
- Cap: a 7×7 layer of Casing with one Turbine Rotor in the center. The power comes out of this rotor's shaft.
The smallest working turbine is a floor, one blade layer and a cap. The turbine checks its structure every 2 seconds, and goggles on any rotor tell you if something's missing.
Blades are 2 blocks long. Place the blade in the space next to the rotor; it turns to face the right way by itself.
On Its Side#
You can also build the turbine lying down, along the east-west or north-south axis. Build the same layers sideways; it works exactly the same.
Blades and Efficiency#
Each arm with a blade adds to the turbine's efficiency:
- a Brass Blade counts fully;
- an Andesite Blade counts 70%.
One Brass Blade on every arm gives 100% efficiency. With no blades at all, the turbine runs at 10%. Mixing blade types is fine; efficiency falls in between.
Low efficiency costs you twice: the turbine makes less SU and burns more Steam for it.

Output#
Every blade layer adds speed, power and Steam use.
| Blade layers | Speed | Stress capacity (100% efficiency) | Steam use |
|---|---|---|---|
| 1 | 16 RPM | 8,192 SU | 2 mB/t |
| 5 | 48 RPM | 73,728 SU | 6 mB/t |
| 7 | 64 RPM | 131,072 SU | 8 mB/t |
| 10 | 64 RPM | 180,224 SU | 11 mB/t |
| 15 | 64 RPM | 262,144 SU | 16 mB/t |
| 20 (max) | 64 RPM | 344,064 SU | 21 mB/t |
Speed rises 8 RPM per layer (counting the cap) and tops out at 64 RPM from 7 blade layers up.
If you supply less Steam than the turbine wants, it still runs, but its SU drops to match. Goggles show this as Steam Supply.
A full-size turbine uses half of what one max-size Solar Power Tower makes in Steam mode by day, so with tanks to store the extra, one tower runs it through the night too.
Water#
Burnt Steam turns back into Water: 1 mB of Water for every 10 mB of Steam. You have to pipe it out. If the water tank fills up, the turbine stops.
Pipes#
Connect pipes to any Casing block. Steam goes in, and Water comes out.
| Tank | Size |
|---|---|
| Steam | 16,000 mB |
| Water | 8,000 mB |
Other Fuels#
With Create: CROWNS installed, it also burns CROWNS steam (see Compatibility).
With Create: Northstar Redux installed, the turbine can also burn Liquid Hydrogen, at the same rate as Steam. It can't hold both at once: let the tank run dry before switching fuels.
Other Info#
- Steam is a gas: in a Create Fluid Tank it fills from the top down.
- While running, the static blades hide and spinning blades are drawn instead.
- Sneak-right-click any part with a Wrench to pick it up.
- Advancements: "Steam Powered" for building one, and "Waterlogged" if you let it flood.